Home > Roadbike Bearings >

F1 Ceramic BB for BB86/Shimano 10/11 Road
F1 Ceramic Bearings for BB86/Shimano 10/11 Bottom Bracket (BB)


Product Code: BB86BBSHIMANO

Which Grease should we build your bearings with?

Select grease type for your build.*:
Install Heavier Outer Seal? Good for Cross/Wet

Install our "Cyclocross" seals:
No Thanks
Yes [Add $10.00]
Make it a Combo, Add Ceramic Pulleys!

Add F1 Ceramic Pulleys:
No Thanks
Shimano 10/11, Black Dustcaps [Add $95.00]
Shimano 10/11, Blue Dustcaps [Add $95.00]
Shimano 10/11, Gold Dustcaps [Add $95.00]
SRAM 10/11, Black Dustcaps [Add $95.00]
SRAM 10/11, Blue Dustcaps [Add $95.00]
SRAM 10/11, Gold Dustcaps [Add $95.00]
Shimano 10/11, Black W/ROCKET SAUCE [Add $115.00]
Shimano 10/11, Blue W/ROCKET SAUCE [Add $115.00]
Shimano 10/11, Gold W/ROCKET SAUCE [Add $115.00]
SRAM 10/11, Black W/ROCKET SAUCE [Add $115.00]
SRAM 10/11, Blue W/ROCKET SAUCE [Add $115.00]
SRAM 10/11, Gold W/ROCKET SAUCE [Add $115.00]
Add F1 Grease for Future Maintenance?

Add F1 Grease:
No Thanks
10 ml F1 Turbo Grease [Add $20.00]
10 ml F1 ROCKET SAUCE [Add $30.00]

Description Technical Specs

F1 Ceramic bottom brackets are designed and built to be serviceable, durable and silent. The quality starts with our bearings. Made in the USA, using premium components, and built to order. Each part of the bearing is individually graded before building your bearing. This combination of quality, strength and reliability gives us the confidence to offer you a 3 year warranty.

This kit is for the Shimano BB86 system that uses press in cups and Shimano 10/11 speed cranks. BB86 is used on many new Giant, BMC and Scott bikes using the press in design. Also, some lower end Trek Madone and Trek Domane frames use BB86 so be sure to check your frame for compatibilty. This is for bottom bracket shells that have a 41mm ID.

New COATED BB Spins 44 Revolutions!!
New COATED BB, Lightly Spun!
  • Premium F1 Ceramic Bearings using grade 3 Ceramic Balls
  • BB86 Standard
  • 65g
  • Drastically reduced bearing resistance
  • More durable than steel bearings
  • Required upgrade for racers and fast club riders
  • This kit is for BB86 frames and Shimano 10/11 speed cranks.
  • Compatible with Shimano 10 and 11 Speed Cranksets (also known as Hollowtech 2)
  • 3 Year Warranty

Average Customer Review: 5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
Really nice improvemnt November 18, 2013
Reviewer: Mike Davis from Washington State  
I was glad these are offered in alloy since most plastic has issues with longevity.  I knew F1 makes the best form my son's BMX bike and this BB doesn't disappoint at all.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
A definite plus January 21, 2013
Reviewer: Kevin from Sonoma CA  
pulled the stock shimano cups and pressed these in.  Rode for a few days to break them in and now 1 year later they are still great!

Was this review helpful to you?

  4 of 4 people found the following review helpful:
Faster than stock September 6, 2012
Reviewer: George from PA  
When I started racing this season I switched out the shimano bb and went with this one.  Couldn't be happier.  Higher cadence and I swear I am fresher at the end of races.

Was this review helpful to you?