F1 Ceramic Bottom Bracket for Press Fit 30 (PF30) or BB386 EVO Road - Clearance
Clearance PF30 bottom bracket built with Turbo Grease. 1 year warranty.
F1 Ceramic bottom brackets are designed and built to be serviceable, durable and silent. The quality starts with our bearings. Made in the USA since 2003, using premium components, and built to order. Each part of the bearing is individually graded before building your bearing.
There are two types of BB30 frames. Original BB30, where the bearings pressed directly into the frame and the newer PF30. Press Fit 30 (PF30) was created as an improvement over BB30 as BB30 bearings were known to click and creak as the tolerance of frames varied, allowing the bearing to move ever so slightly. Enter PF30, using their own cups, making the tolerance of the frame less important.
Be sure to order the proper BB30 kit for your frame. We make both (BB30 and PF30). This is for bottom bracket shells that have a 46mm ID.
This BB will also work on BB386 frames and BBright frames (specific BBright spacer needed, not included with our BB) using a 30mm spindle crank.
- F1 Ceramic Bearings
- Grade 3 Ceramic Balls / ABEC 5
- Built with F1 Turbo Grease
- Drastically Reduced Resistance in your Bottom Bracket!
- More durable and longer lasting than traditional stock bearings
- This is one upgrade you can FEEL!!
- This kit will fit Press Fit 30 frames where the bearings are housed in cups and then pressed into the frame. This is a different (and newer) type of BB30.
- Please consult your frame manufacturer as this kit is not compatible with original BB30 (where the bearings pressed directly into the frame, rather than housed in cups).
- PF30 is not compatible with Specialized's 61mm OSBB. They are different.
- Sold as bearings, cups, dustcovers and wave washer.
- 1 Year Warranty
Find Similar Products by Category
Customers also viewed